Wheels for Volvo 200's

To the best of my knowledge, the below are some of the Genuine Volvo wheels that will fit the 240 and 260 series Volvos. They will also fit 700 series cars without ABS.

These wheels all have the correct 5 x 108mm bolt circle. Offsets are all +20 or +25 mm. Either offset will work fine.

Also, if you have a 140-series (all years), a 164 (1969-1974), or an 1800E/ES (1970-73), all of the 15 and 16 inch rims below will fit. However, these cars came set up for +40mm offset, so the wheels will stick out about half an inch more. Take care if using exceptionally wide tires on these wheels in this application.

If you have a 1975 164, these cars use the same offset as 200 series cars, so all of the 15 and 16 inch will fit properly and have the correct offset.

Prices (where given) are each and are dealer retail as of 3/2001.


These wheels are not available for sale. This page is for informational purposes only.

Notes are located below the chart


14-inch wheels

Corona
1128730-7, 1387157-9
note 1		Scorpius-X
3529180-6
note 2		Early 262C & 264
1128491-6		Early 242GT
1128493-2
Dersus
Polished - 1329915-1
Lacquered - 1387159-5

15-inch wheels

Adhara
6819680-7
note 8
Multi-X
1394593-6
note 3		Draco
1330400-1
note 4		Aries
6819316-8
note 8
Orion
3524845-9
note 4		Virgo Turbo
1128867-7; 1272356
notes 2, 5		Nova (old); Sirius
1229998-8; 1329603-3
note 3		Omega
1359180-5
note 9
Rigel
1329835
note 8
Nova (new)
3516961-4
note 9

16-inch wheels

Galaxy
6820001-3
notes 6,7
$408.46		Gemini
1394623-1
note 8
$429.56		Hydra
3516422-7
note 4
$583.54


Notes:

  1. Two hubcap styles. Small: p/n 1129021-0. Large: p/n 1129031-6
  2. Correct lug nut for these applications: p/n 1272648-5
  3. Two hubcap styles. Stainless: p/n 1272666-7. Plastic: 1325475-0
  4. Hubcap p/n 1343663-9
  5. Hubcap p/n 1272604-8
  6. Hubcap p/n 3529609-4
  7. Requires special long shank lug nut kits, p/n 6820010-3. Each kit contains 10 nuts.
  8. Hubcap p/n??
  9. Hubcap p/n 1358923-9
Back to the main page.

©2001, Evan Reisner - updated by John Laughlin 11/15/07